- Home
- Services
- Industrial and production coating
Industrial and production powder coating
If you build it in steel or aluminum, we can probably finish it. Go Powder coats weldments, enclosures, skids, frames and production parts for manufacturers across Central Alberta.
- 15,000 lbper oven load
- 5overhead tracks, 3,000 lb each
- 32 ftcure oven length, 12 ft wide and 11 ft high
- 6,000 lbLinde forklift for loading and unloading
Built around the overhead line
Parts move through blast, blowdown, powder and cure on an overhead track rated for 15,000 lb a load. Nothing leaves the building between steps.
We prepare surfaces to the SSPC and NACE grade your coating supplier specifies. Our coaters are trained by the powder manufacturers, and we check blast profile and coating thickness with DeFelsko test equipment.
One-off or repeat run, send a drawing and a quantity and we will quote it.
What a purchaser gets from us
One stop
Blast, coat and cure in one 10,000 sq ft indoor facility. One purchase order, one pickup.
Prep to the spec
Surface prep to the SSPC and NACE grade on your coating data sheet, with the blast profile measured.
Readings, not promises
Coating thickness checked with DeFelsko equipment before a part is released.
Recent industrial work
More from the line
Industries we run production for
Questions from purchasers
What is the largest part you can coat?
32 feet long, 12 feet wide and 11 feet high, up to 15,000 lb per oven load. Each overhead track carries 3,000 lb.
Can you coat plate galvanized or stainless steel?
Steel, aluminum, stainless and plate galvanized. Chrome is the one surface we can't powder coat.
Do you work to a coating specification?
Yes. Send the spec or the coating data sheet with your drawing and we prepare to the SSPC or NACE grade it names.
How do repeat runs work?
Send a drawing and a quantity and we'll quote the run. We work on purchase orders. Call us to talk through scheduling for your repeat work.